Disconnect the power cord before servicing the GE washing machine. Turn off the hot and cold water supply faucets.
Unscrew the water inlet hoses from the back of the washer. Set the hoses in a bucket to collect any dripping water.
Remove the screws holding the rear panel in place. Set the rear panel aside.
Loosen the pump coupler clamp next to the motor. Move the coupler out of the way so the belt can be accessed.
Loosen the motor mounting bolts. Do not completely remove the bolts.
Slide the belt off the pulleys. Install the new belt in its place.
Tighten the motor mounting bolts. Reposition the pump coupler. Tighten the coupler clamp.
Replace the rear panel. Install the screws that hold the panel in position.