How to Repair a Maytag Bravos Dryer Heater Element

The Bravos line of appliances by Maytag includes a range of high-efficiency automatic dryers. The heating element inside each Bravos dryer provides the high temperature needed to dry wet clothing quickly and efficiently. One possible sign of a broken heater element is when the dryer runs and tumbles without producing any heat. Replacing the broken heater element with a new part is a project that you can perform with only basic tools.

Phillips screwdriver

Instructions

- 1
  Unplug the power cord. Slide the Maytag Bravos dryer away from the wall.
- 2
  Remove the screws holding the back panel in place. Lift the back panel off of the dryer cabinet.
- 3
  Pull out the electrical connectors from the heater element.
- 4
  Remove the screws holding the heater element to the inside of the dryer cabinet.
- 5
  Remove the heater element assembly from the dryer. Remove the screw at the base of the assembly.
- 6
  Slide the old heater element out of the assembly.
- 7
  Insert the new heater element into the assembly. Install the screw at the base of the assembly.
- 8
  Replace the heater element assembly inside the Maytag Bravos dryer cabinet. Connect the screws that hold it to the cabinet.
- 9
  Plug the electrical connectors into their sockets on the heater element assembly.
- 10
  Replace the rear panel. Install the screws that hold the panel in place.

How to Cancel the Lock on a Frigidaire Self Cleaning Oven

How to Check the Belt on a Samsung Front Loading Dryer

Appliance Repair