# Removing the Front of a Frigidaire GLEQ942CSO
The Frigidaire GLEQ942CSO is a front-loading automatic dryer equipped with multiple dry cycle options. This model is part of the Frigidaire Gallery series line of appliances. If internal components such as the drum, belt, motor or heating element need to be tested or replaced, you first must open the cabinet. The front panel can be removed to access internal components and replaced after the needed repair or troubleshooting steps have been performed.
Things You'll Need
- Phillips screwdriver
Instructions
-
-
1
Disconnect the power cord before servicing the Frigidaire dryer.
-
2
Open the dryer door. Remove the screws securing the front panel from inside the drum.
-
3
Pull the front panel forward to expose the electrical connector leading to the front panel. Unplug the connector from its socket.
-
4
Lift the front panel away from the GLEQ942CSO and up to remove it from the dryer cabinet.
-
1
Appliance Repair
- My Kenmore Elite Has No Power on the Front Panel
- Removing the Legs on a Frigidaire Dishwasher
- How to Replace the Shocks on a Frigidaire Front Load Washer
- How to Replace the Pressure Switch on a Frigidaire Affinity
- Removing the Freezer Panel on a Maytag PBF1951HEQ
- The Front Panel Removal of the GE WWSE5240G3WW Washer
- How to Access the Belt on My Frigidaire Washer
- Removing the Front Bottom Panel on a Bosch Axxis Washer
- How to Remove the Front Cover of a Frigidaire Washer
- Removing the Front Panel on a GE WHDSR315D
- How to Remove the Outlet on a Frigidaire Front Loading Washer
- Removing the Front Panel of a Stacked Washer
