# How to Replace the Dryer Power Cord on a Maytag Atlantis
Maytag Atlantis automatic dryers come in a wide range of models. Each model must have a working power cord for the dryer to work properly. If the power cord in your Maytag Atlantis dryer is defective or if it stops working, it can be removed so a new one can be installed in its place. It may also be necessary to replace the power cord if you are moving the dryer to a new location with a different type of outlet.
Things You'll Need
- Nut driver
- Phillips screwdriver
Instructions
-
-
1
Slide the Maytag Atlantis dryer away from the wall so the back can be accessed.
-
2
Unplug the existing power cord from the electrical outlet.
-
3
Remove the screw holding the cord connection cover onto the back of the Maytag dryer. Lift the cover off the dryer.
-
4
Remove the screws on the wire terminals. Lift the power cord wires off the terminals.
-
5
Position the new power cord wires onto the terminals. Replace the screws that hold the wires in place.
-
6
Replace the power cord connection cover. Install the screw that holds the cover to the Maytag Atlantis dryer.
-
1
Appliance Repair
- How to Replace the Thermostat on an Admiral LNC7764A71 Dryer
- How to Test the Ignitor on a Maytag Dryer
- How To Replace the Igniter on a Maytag Oven
- How to Replace the Cord on an E1 Rainbow Vacuum
- How to Replace the AC Power Cord on a LG Air Conditioner
- How to Replace the Power Cord in a Whirlpool Ultimate Care II
- How to Replace the Thermistor in a Dryer
- How to Replace the Belt on a GE Profile Performance Dryer
- How to Close the Moisture Sensor on a Maytag Dryer
- How to Replace the Bearing on a Maytag Atlantis
- How to Replace the Tub Bearing on a Maytag Atlantis Washer
- How to Replace the Thermocouple on a Maytag Electric Performa Dryer
