How to Fix the Belt on a GE WBSR3000G1WS Top-Loading Washer

The belt on the GE WBSR3000G1WS automatic top-loading washer is located at the base of the cabinet. The motor powers the movement of the belt, which is connected to a pair of pulleys that control the tub and agitator. A broken belt removes the connection between the pulleys, preventing the washing machine from operating properly. You can replace the belt on the GE WBSR3000G1WS washer yourself in a short period of time, thereby avoiding the expense of a service call.

Instructions

1. • 1

     Unplug the power cord from the electrical outlet.

   • 2

     Slide the GE WBSR3000G1WS washer away from the wall. Tilt the washer back against the wall with the front feet raised so that you can access the bottom.

   • 3

     Slide the broken belt off the pulleys.

   • 4

     Position the new belt around the small pulley. Rotate the large pulley by hand while sliding the belt around it until it is seated firmly.

   • 5

     Lower the washer back onto its feet. Slide the washer against the wall, then plug it back in.