How to Access the Belt in an Amana Dryer

Amana automatic gas and electric dryers come in a variety of models, ranging from compact to extra large capacity. Each model contains a tumbler drum that rotates while the dryer is running to keep laundry moving around inside the cabinet. The belt wraps tightly around the drum and connects to a set of pulleys powered by the dryer motor. If the belt is defective or becomes damaged, it may need to be replaced. The belt can be accessed by removing part of the dryer cabinet.

Things You'll Need

• Phillips screwdriver

Show More

Instructions

1. • 1

     Unplug the power cord before opening the dryer.

   • 2

     Open the dryer door. Remove the screws on the underside of the top panel.

   • 3

     Lift the top panel up. Rest the panel against the wall behind the dryer.

   • 4

     Remove the two screws holding the front panel to the dryer cabinet. Lift the front panel up and away from the dryer to disconnect it.

   • 5

     Unplug the door switch electrical harness. Set the front panel aside.

   • 6

     Move the idler pulley away from the belt. The idler pulley is located below the drum.

   • 7

     Slide the belt off of the two pulleys. The belt can now be inspected or replaced.