DIY: Beamer Controller TV Tuner

The Beamer Controller TV Tuner is a device that places video calls on a television screen. This device works much like a web cam with the difference being that you view the caller on your television instead of a computer monitor. You don’t have to be a video expert to install the Beamer Controller TV Tuner. You can do it yourself with little hassle and minimal knowledge of the unit.

Instructions

- 1
  Put the Beamer TV Tuner close to the TV so you can run the cables to your television.
- 2
  Connect the telephone cord to the telephone jack in your wall. Connect the other end to the “Line In” jack on the back of your Beamer unit.
- 3
  Connect another telephone cord to your phone and then connect the other end to the “Phone In” jack on the back of your Beamer TV unit.
- 4
  Plug the video cable into the “Video Out” plug on your Beamer TV Tune and then plug the other end into the “Video In” plug on your TV.
- 5
  Plug in the power cable to the back of the Beamer unit and then plug it into the wall outlet in your home. Plug your TV into a wall outlet if it isn't already plugged in.
- 6
  Turn on your TV and go to the input that your Beamer tuner is set to. You should see the “Beamer” logo. The unit is now ready for use.

How to Use a 50 Amp Breaker for Minn Kota

How to Create Voltage for an Offset Thermistor

Appliance Repair