# How to Get the Outer Casing off an Admiral Dryer
Admiral automatic dryers are manufactured by the Maytag company. They come in both gas and electric models. Each model has a distinct set of features and dry cycles. When repairs need to be made or parts need replacement, you usually have to remove the outer. Once the outer cabinet panels have been taken off of the Admiral dryer, parts such as the motor, drum, pulleys, belt and others can be inspected or repaired as needed.
Things You'll Need
- Phillips screwdriver
- Plastic putty knife
Instructions
-
-
1
Unplug the power cord from the wall socket.
-
2
Insert the plastic putty knife into the gap between the top and front panels. Press the knife into the internal clips located about 2 inches from each front corner.
-
3
Lift the top panel up. Rest the panel against the wall behind the Admiral dryer.
-
4
Unplug the electrical connector leading to the door switch.
-
5
Remove the two screws connecting the top of the front panel to the dryer cabinet. Tip the front panel back and lift up to remove it. The interior components can now be easily accessed.
-
1
Appliance Repair
- How to Replace the Thermostat on an Admiral LNC7764A71 Dryer
- How to Test the Thermodisc in a Dryer
- How to Bypass the Thermal Fuse on an Admiral Dryer
- How to Test the Ignitor on a Maytag Dryer
- How to Get to the Motor of a Maytag Atlantis Washer
- How to Repair the Motor in a Thermal Dryer
- How to Replace the Front Felt Seal on a GE Gas Dryer
- How Do You Get to the Ignitor in a Roper Gas Dryer?
- How to Take the Front Panel Off of an HE2 Kenmore Dryer
- How to Remove a GE Clothes Dryer Front Panel
- How to Get at the Igniter on a Whirlpool Dryer
- How to Get to the Motor in a Frigidaire Dryer
