# How to Remove the Front Cover of a Frigidaire Washer
Frigidaire washers are designed with removable panels on the front and back to access different internal components that may need to be repaired or replaced. This is a useful feature because the entire appliance does not need to be disassembled just to reach one part on the inside. For example, access to the transmission and drive belt is through the front of the washer, below the laundry drum. Use simple hand tools to remove the front cover.
Things You'll Need
- Flat-blade and Phillips-head screwdrivers
Instructions
-
-
1
Unplug the Frigidaire's power cord from the wall.
-
2
Insert the tip of a flat-blade screwdriver into the crevice between the top of the washer and the front cover, 3 inches from the left corner. Pry up the top and pull the clip underneath. Remove the clip 3 inches in from the right corner as well.
-
3
Lift the top of the Frigidaire gently toward the back of the appliance where it will rest in the upright position.
-
4
Take out the screws on the left and right edges of the front cover.
-
5
Pull downward on the cover while gripping the part on the left and the right to disengage it from the cabinet sides. Pull off the cover and set aside. You can now access the interior of the Frigidaire.
-
1
Appliance Repair
- How to Change the Bearings on a Frigidaire Front-Load Washer
- How to Replace the Shocks on a Frigidaire Front Load Washer
- How to Remove the Shell of a Maytag Bravos
- How to Remove the Pressure Washer Unloader Valve
- How to Remove a Frigidaire Laundry Bearing
- How to Fix the Shocks on the Frigidaire FWT647GHS0
- How to Remove the Front Panel From a Samsung Washer
- How to Disassemble a Frigidaire ATF6700FS Washer
- How to Access the Belt on My Frigidaire Washer
- How to Remove the Front Panels of a Kenmore HE3T Washer
- How to Remove the Front Cover of a Samsung Refrigerator Icemaker
- How to Remove the Outlet on a Frigidaire Front Loading Washer
