How to Replace the Glass on the Front of a Whirlpool Range

Some models of Whirlpool ranges have a glass front, which can make them an assest to any kitchen's decor. However, over time, the glass front can become hazy or even cracked. A hazy or cracked glass front on your Whirlpool range can be an eyesore in the kitchen and detract from the room's decor. You can acquire a new glass piece from an authorized Whirlpool parts dealer, online or locally. The glass front can be installed easily using a straightforward procedure.

Phillips screwdriver
Pliers

Instructions

- 1
  Open the oven door and grab it on either side with your hands. Pull straight up on the door to remove it from its hinges. Lay the door on a flat surface .
- 2
  Unfasten the screws that secure the metal trim around the glass front. Use a Phillips screwdriver to turn the screws counterclockwise to remove them. Pull off the trim once all the screws have been removed.
- 3
  Pull off the clips that hold on the glass using a pair of pliers. Remove the old glass front.
- 4
  Set the new glass front in place on the door frame and press the clips in place where you removed them from in the previous step.
- 5
  Fit the metal trim around the door and insert the screws and tighten them with the screwdriver.
- 6
  Reinstall the door onto its hinges by aligning the slots and pushing down on the door until the hinges are completely inserted.

Testing the Oven Broil Element

A Rotten Egg Smell When Turning on a Gas Heater

Appliance Repair