# How to Replace the Door Latch on a Whirlpool Cabrio Dryer
The door latch in a Whirlpool Cabrio automatic dryer keeps the door securely closed when the dryer is running. The door strike on the door frame snaps tightly into the door latch. If the door latch breaks or otherwise fails, the dryer will sense that the door is not fully closed, preventing it from running. Replace the broken door catch with a new replacement part to restore proper working condition to your Whirlpool Cabrio dryer.
Things You'll Need
- Phillips screwdriver
- Needle-nose pliers
Instructions
-
-
1
Unplug the dryer power cord. Open the door.
-
2
Remove the screws holding the door hinges to the dryer cabinet. Lift the door off of the dryer cabinet. Set the door down with the inside facing up.
-
3
Remove the screws along the top edge of the door. Pull the halves of the door apart.
-
4
Squeeze the inside of the door latch with the needle nose pliers. Push the latch through the front of the door to remove it.
-
5
Place the new door latch into position on the door. Press down on the latch to snap it into the door.
-
6
Snap the door halves back together. Replace the screws along the top edge of the door.
-
7
Replace the door onto the cabinet. Install the screws holding the hinges in place.
-
1
Appliance Repair
- How to Replace the Flame Sensor on a Whirlpool LGN2000JT0
- How to Replace the Tube in a Whirlpool Refrigerator Door
- How to Switch a Whirlpool Dryer Door to the Left Opening
- How to Connect the Heating Element to a Whirlpool Cabrio Dryer
- How to Replace the Heater Assembly on a Whirlpool Electric Dryer
- How to Replace the Blower Belt on a Whirlpool Cabrio
- How to Replace the Dryer Door Switch Assembly on a Whirlpool LER7648PT1
- How to Replace the Door Sensor on a Whirlpool Electric Dryer
- How to Replace the Door Latch on a Bosch Axxis Dryer
- How to Repair a Dryer Door Latch on a Whirlpool Cabrio
- How to Replace the Door Latch on a Whirlpool Duet
- How to Change the Latch on a Whirlpool Cabrio Dryer
