How to Replace the Drive Belts on Maytag Washing Machines

Maytag produces automatic washing machines in a wide range of models, each with a distinct set of features and available wash cycles. The drive belts on each model connect the transmission pulley and pump pulley to the drive motor pulley at the base of the machine. The pulley system powers the movement of the tub and agitator. If either of the belts becomes damaged, the washer will not function properly. Replace the faulty drive belts to restore your Maytag washer to proper working condition.

Things You'll Need

• Wood block
• New drive belts

Show More

Instructions

1. • 1

     Unplug the Maytag washer from the electrical outlet.

   • 2

     Tilt the washer back against the wall so the bottom can be reached. Place a wood block under the front of the washer to hold it in place.

   • 3

     Pull the motor toward the center of the dryer to loosen the belts.

   • 4

     Slide the belts off the pulleys.

   • 5

     Position the new belts around the pulleys where the old drive belts were located. Release the motor to allow it to return to its original position.

   • 6

     Remove the wood block from under the Maytag washing machine. Set the washer back onto its feet.