How to Install a Drive Belt on a GE Washing Machine

The drive belt on a GE washing machine connects the tub drive pulley to the motor shaft. As the motor runs, the belt pulls the pulley to power the movement of the washtub. When a drive belt breaks, the washer can no longer function. Remove the defective belt and install a new one in its place to repair your GE washing machine and return it to working order.

Phillips screwdriver

Instructions

- 1
  Disconnect the power cord from the electrical socket.
- 2
  Turn off the water faucets connected to the washing machine. Disconnect the water inlet hoses from the back of the machine. Place the ends of the hoses in a bucket to collect any remaining water.
- 3
  Slide the machine away from the wall so you can access the back.
- 4
  Remove the screws around the edges of the rear service panel. Lift the panel off the washer cabinet.
- 5
  Rotate the drive pulley by hand. Slide the drive belt off the pulley with the other hand. Pull the belt off the motor shaft.
- 6
  Position the new belt around the motor shaft. Loop the other end around the large drive pulley.
- 7
  Replace the rear service panel. Install the screws that hold the panel in place.

How to Remove the Blower From a Maytag MDE9700AYW

How to Repair the Belt on an Admiral Capacity Plus Washer

Appliance Repair