# Removing a Flat Top Jenn-Air Stove
Jenn-Air appliances are high-end appliances manufactured by Whirlpool, Jenn-Air's parent company. Jenn-Air ranges are available in both gas and electric models, with electric models that include a smooth flat-top surface. The flat-top surface is made of glass, and may break if a large object is dropped onto it. If the flat-top surface breaks, you must not use the range until a new panel is installed. To save time and money, install the new flat-top surface yourself.
Things You'll Need
- Screwdriver
- Support rod
Instructions
-
-
1
Turn off the range breaker in your home's service panel, or unplug the power cord if it is accessible.
-
2
Open the oven door and look at the underside of the front of the flat-top panel. Locate the screws that secure the top to the cabinet. There may be two to four screws, depending on the model of your Jenn-Air range.
-
3
Remove the screws from the underside of the front of the flat-top panel then close the oven door.
-
4
Lift the main top up, and secure it in an elevated position using a support rod.
-
5
Remove the screws and brackets securing each burner to the underside of the flat-top panel.
-
6
Lift the panel up and off of the range.
-
1
Appliance Repair
- How to Get to a Burner Switch Installed on a Jenn-Air Glass Stove Top in an Island
- Can a Stove Top Be Transferred to Another Stove?
- How to Change a Stove Top GE Model JSP46WD2WW
- Removing the Freezer Panel on a Maytag PBF1951HEQ
- Replacement Procedures for a GE Glass Stove Top
- How to Replace a Burner on the Maytag Flat Top Stove
- How to Clean Up a Burnt Spill on a Flat Top Stove
- How to Clean a Flat-Top Stove With Burned Stuff on It
- How to Clean the Flat Top Eyes on an Electric Stove
- How to Clean a Kenmore Flat Top Stove
- How to Clean Baked-on Grease on a Flat Stove Top
- Removing Melted Plastic on the Flat Top of an Electric Stove
