# How to Replace a Glow Igniter on the Maytag Gemini
Electric Maytag Gemini ovens have two baking elements, one on the top of the oven and another on the bottom. Each element has an igniter in it that sends a signal from the control panel to the actual element, causing it to begin glowing. If the glow igniter breaks, you’ll have to replace the entire element.
Things You'll Need
- Screwdriver
Instructions
-
-
1
Unplug the oven.
-
2
Open the oven door and remove the four screws that secure the bottom element in place. Set each aside in a safe place; don’t lose them.
-
3
Pull the element from the oven wall, disconnecting it from the terminals with gentle force.
-
4
Connect the replacement heating element directly to the terminals; you should hear it click into place.
-
5
Secure the heating elements in the oven by replacing the four screws.
-
6
Repeat the process with the heating element on top of the oven. The only difference here is that two rather than four screws hold the element in place.
-
1
Appliance Repair
- How to Replace the Gasket Seal on a Dacor Oven
- How to Replace the Igniter on a Thermador Gas Cooktop
- How to Replace the Igniter on a Magic Chef Model 3121XRS
- How To Replace the Igniter on a Maytag Oven
- How to Replace the Ignitor in a Gas Maytag Gemini
- How to Replace the Hinges on a KitchenAid Oven
- How to Replace the Oven Igniter in a GE XL44 TM Gas Range
- How to Replace Oven Ignitor on a Maytag MGR5770ADW
- How to Replace the Oven Ignitor in a Maytag Range
- How to Replace the Bottom Element in a Jenn-Air Oven
- How to Replace a Frigidaire Oven Element
- How to Replace the Glass on a Maytag Gemini Double Oven
