Removing the Agitator Belt Coupling on a GE Washer WVSR1060B3WW

The GE WVSR1060B3WW is a top-loading automatic washer manufactured for residential use. The agitator is connected to the base of the washer tub with a coupling assembly. The coupling connects the agitator assembly to the belt and pulley system powered by the motor. If the coupling is defective or broken, the agitator will not rotate properly when the washer is running. Remove the faulty coupling to install a new part in its place.

Things You'll Need

• Socket wrench
• Rope or strong cord, 3 or 4 feet long
• Wood block

Show More

Instructions

1. • 1

     Unplug the power cord. Open the lid on the washer.

   • 2

     Wrap a rope around the base of the agitator along the groove above the bottom fins. Tie the other end of the rope to a wood block.

   • 3

     Position the wood block on the top edge of the washer. Push the wood block down on the outside of the washer to pry the agitator up until it disconnects. Lift the agitator out of the washer tub.

   • 4

     Remove the bolt in the center of the agitator coupling. Lift out the agitator belt coupling.