# Installing the Ignition in a Magic Chef CGR3765ADC Oven
The Magic Chef CGR3765ADC is a freestanding gas oven range manufactured for home use. The ignition system creates a flame at the end of the gas supply line. Unlike a pilot light, the igniter comes on only when needed rather than staying on all the time. If the ignition no longer functions, the oven will not produce any heat. The interior area of the oven must be accessed to install a new igniter when the old part breaks or malfunctions.
Things You'll Need
- Phillips screwdriver
Instructions
-
-
1
Unplug the power cord from the electrical socket.
-
2
Open the oven door. Slide the racks out of the oven.
-
3
Remove the screws holding the convection fan cover in place on the inside back panel. Lift the fan cover off.
-
4
Grasp the two tabs at the back of the bottom interior panel. Pull the tabs forward to unhook the bottom panel.
-
5
Remove the screws securing the igniter to the gas line. Unplug the electrical connector from the igniter. Remove the old igniter from the oven.
-
6
Position the new igniter inside the Magic Chef CGR3765ADC oven. Install the screws that hold it in place. Plug the electrical connectors into their sockets.
-
7
Replace the bottom panel. Replace the convection fan cover. Install the screws that hold the cover in place.
-
1
Appliance Repair
- How to Adjust the Ignition Timing on a Kenmore Stove
- How to Replace the Igniter on a Magic Chef Model 3121XRS
- How To Replace the Igniter on a Maytag Oven
- My Magic Chef Oven Range Smells Like Lighter Fluid
- How to Replace the Oven Igniter in a GE XL44 TM Gas Range
- How to Replace the Ignition on a Jenn Air Cooktop
- How to Remove the Tub on a W20EN4 Magic Chef Washer
- How to Change the Fan for the Grill on a Magic Chef Cooktop
- How to Fix a Magic Chef Oven Door Hinge
- How to Replace the Electronic Controller on the Magic Chef Gas Oven
- How to Check Magic Chef Ignition Switches
- How to Reset the Switch for a Magic Chef Gas Oven
