How to Fix the Shocks on the Frigidaire FWT647GHS0

Unplug the power cord and turn off the water faucets leading to the washer. Remove the water inlet hoses from the back of the washer.

Pull the detergent drawer out and press the release tab in the back of the drawer. Remove the drawer from the cabinet. Remove the screws next to the detergent drawer compartment.

Remove the screws along the back of the top panel. Lift the top panel back and up and set the top panel aside.

Remove the two screws along the base of the lower front panel. Lift the panel off the washer.

Remove the screws in the corners of the control console. Press the locking tabs along the back of the control console. Unplug the electrical connectors from the back of the console. Set the console aside.

Open the washer door. Grasp the bellows spring wire at the base of the tub. Lift the spring wire off.

Close the door. Remove the screws from the top and bottom edges of the front panel. Lift the panel off the washer cabinet and set aside.

Remove the screws along the edges of the rear service panel. Lift the panel off.

Press the locking tab at the end of the right shock absorber locking pin. Pull the pin out with the pliers. Repeat for the left shock absorber.

Remove the faulty shocks from the washer. Insert the new ones in their place. Insert the locking pins into the base of each shock.

Reverse the disassembly steps to put the Frigidaire washer back together.