Unplug the power cord from the electrical outlet. Turn off the hot and cold water faucets leading to the washer.
Open the door. Remove the four screws along the inside door frame. Lift the door away from the cabinet and set aside.
Lift the front panel straight up to disconnect if from the base. Set the panel aside.
Remove the screws connecting the detergent dispenser to the cabinet. Remove the screws holding the top panel to the cabinet. Lift the top panel off the washer cabinet.
Lift the door boot gasket up to unsnap it from the cabinet.
Remove the screws around the edge of the front shroud. Lift the front shroud off the cabinet.
Remove the screws around the spin basket. Lift the outer tub cover off and set aside.
Remove the screws holding the baffles to the washer tub. Lift the baffles out of the tub.
Remove the three bolts holding the spin basket to the tub assembly. Lift the spin basket out.
Remove the bolts holding the balance ring to the spin basket. Lift the balance ring off the basket.
Position the new balance ring onto the spin basket. Reverse the disassembly steps to put the Maytag Neptune washer back together.