# How to Change a Belt on a Frigidaire FEX831FS1 Washer Machine
The Frigidaire FEX831FS1 is a stacked laundry center with a washer and dryer. The washer is equipped with a drive belt that controls the movement of the tub and agitator. A broken belt prevents the washer from operating properly. Change the faulty belt with a new part to restore your Frigidaire laundry center washer to proper working condition.
Things You'll Need
- Phillips screwdriver
Instructions
-
-
1
Unplug the power cord from the electrical outlet.
-
2
Remove the two screws along the bottom of the washer front service panel. Pull the panel down to disconnect it from the washer cabinet. Set the panel aside.
-
3
Move the idler pulley toward the belt. Slide the belt off the pulleys.
-
4
Loop the new drive belt around the pulleys. Move the idler pulley to its original position to restore belt tension.
-
5
Replace the front service panel. Install the two screws that hold it to the cabinet.
-
1
Appliance Repair
- How to Change a Bearing on a LG Washer
- How to Change a Pump in a Frigidaire Washer
- How to Change the Deck Belt on a Yard Machine
- How to Change a Kenmore Washer Valve
- How to Remove the Belt on a Magic Chef Washing Machine
- How to Access the Belt on My Frigidaire Washer
- How to Replace a Belt on a Frigidaire Front-Loading Washing Machine
- How to Change the Belt on a Maytag Neptune Washing Machine
- How to Change a Belt on a Vintage Kenmore Sewing Machine
- How to Change a Drawer Belt
- How to Disassemble a Frigidaire Affinity Washer
- How to Fix the Belt on a GE Washer
