Ionic Breeze Quadra Instructions

Place the Ionic Breeze on a level surface in the room. Make sure it is at least 12 inches away from the wall. Plug the power cord into a 110 volt electrical outlet.

Press the "Control" button on the top of the unit to turn the Ionic Breeze "On".

Continue pressing the "Control" button to cycle through the settings. Choose between "High," "Medium," "Low" or "Off". The selected level will light up green and the air purifier will start cleaning, ionizing and circulating the air in periodic bursts, elevating the airflow up and down according to the pre-programmed cycles.

Clean the Ionic Breeze at least once every two weeks. Failure to do so will shut down the unit's operation. This will be indicated by a red LED light on the top of the unit.

Unplug the Ionic Breeze, grasp the collection grid on the top of the unit and pull it up to remove it. Use a clean, damp washcloth or sponge and wipe the dust off of each the three collection bars. Turn the Ionic Breeze upside down for three seconds, then place the collection grid back into the unit.

Prepare a solution of one cup of bleach to five cups of water. Use a soft cloth or sponge and wipe down the outside of the unit. Allow the surface to dry for 24 hours before plugging it back into the socket.

Thoroughly clean the grid and ionizing wires if the unit makes noise at any point in the operation. Remove the collection grid and wash it with warm soapy water. Rinse the grid and allow it to dry for 24 hours before placing it back into the unit. Turn the Ionic Breeze upside down multiple times to completely remove trapped particles.