Tips for Cleaning the Ionic Pro Turbo

Regular Maintenance

• The Ionic Pro Turbo air purifier should be cleaned once a month or anytime the red Clean/Fault line is lit. To clean the air purifier, make sure that it is unplugged from the wall and allow it to rest for a minute to ensure that the internal collection blades have stopped rotating. Access the collection blades by pulling up on the release latch of the collection blade unit. Pull the latch outward to open the main door and completely remove the collection blade unit from the Ionic Pro Turbo air purifier. Use a damp sponge or rag to wipe away the visible dirt and debris on the collection blades. It is important to allow the collection blade unit to dry completely before reinserting it into the base. Let the blades dry for at least two to three hours to prevent residual moisture from damaging the motor of the air purifier.

Deep Cleaning

• The Ionic Pro Turbo will need to be thoroughly cleaned occasionally. The machine will begin to emit a loud buzzing sound when this deep cleaning is necessary. Before beginning this procedure, turn off the air purifier and make sure that it is unplugged from the wall outlet. Open and remove the collection blade unit by pulling up on the release latch just as you would during the regular maintenance cleaning of the machine. Wash the blades thoroughly with a sponge and warm, soapy water. Once all of the dirt has been removed, wring out the sponge and use fresh, clean water to rinse away all soap residue. Allow the blades to dry completely before reinserting them into the air purifier. The Ionic Pro Turbo manual recommends waiting at least 24 hours to ensure that the collection blades are completely dry.

  The external surfaces of the base unit can be cleaned at this time as well. Mix 1 oz. of detergent with 5 oz. of water and apply the soapy water carefully to the outside of the air purifier with a damp sponge. Avoid getting any water inside the machine during cleaning as this may damage the internal components. Allow the base unit to dry for 24 hours before you turn it on.