Lasko 2554 Instructions

Avoid the summer heat by using a cooling fan with built in ionizing technology. Ionizers make effective air cleaners because the negative ions they produce attract dust and smoke particles in the atmosphere. When the ions and particles collide, the minute electrical charges produced cause the dust to settle and create a clean, pollutant-free environment. Lasko has been a leading electric fan producer in the United States since 1906, and the wind curve 2554 fan is a modern solution to your cooling needs.

2 AAA batteries
Remote control

Instructions

- 1
  Place the fan on a firm, level surface, and plug the electrical cable into a power supply.
- 2
  Remove the plastic panel from the rear of the remote control, and insert two AAA batteries, ensuring their correct polarity. Replace the battery cover.
- 3
  Turn the fan on by pressing the "Power" button either on the fan or the remote control. Turn the fan off by pressing the button again.
- 4
  Adjust the fan speed by pressing the "Fan" button. Scroll through the speeds by repeatedly pressing the button. Select the appropriate speed from "Low," "Medium" or "High."
- 5
  Start the fan oscillation by pressing the "Oscillation" button. Press the button again to stop the movement.
- 6
  Set the timer by using the "Timer" button. Each press will increase the timer time by 30 minutes to a maximum of 7 1/2 hours. Once you have reached this maximum time, a further press will cancel the timer function.
- 7
  Activate the ionizer function by pressing the "Ionizer" button. Turn it off by pressing the button again.

My Central Air Is Blowing Hot Air; What Is Going On?

Texas Law Regarding Apartment Air Conditioners

Air Conditioners