# How to Remove the Drip Tray From My General Electric AJA12DFV1
The General Electric AJA12DFV1 is a room air conditioner that allows you to cool one room at a time. The GE AJA12DFV1 can either be placed in a window or mounted in a wall cabinet. This room air conditioner has adjustable fins to select where the cool air will blow, a thermostat labeled from 1 to 10 and two different levels of cooling -- low and high. The drip tray on the GE AJA12DFV1 collects the water that drips during use. Removing the drip tray is the only way to clean it if it gets dirty.
Things You'll Need
- Screwdriver
Instructions
-
-
1
Loosen the locking screw on each side of the GE AJA12DFV1. Turn the locking plate 90 degrees.
-
2
Unscrew the ground screw from the air conditioner with the screwdriver and remove the ground wire. The ground screw and ground wire are located at the bottom front of the air conditioner.
-
3
Lift the air conditioner and pull out the drip pan.
-
1
Previous:
Next:
Air Conditioners
- How to Stop Leaking From the Front of a Sears Window Air Conditioner
- How to Get Rid of the Smell of Mildew From a Central Air Conditioner
- How to Check the Oil in an Air Conditioner
- How to Control the Power on an Air Conditioner Unit
- The Drip Pan Does Not Drain from the Air Conditioner
- How to Clean Slime From a Drip Tray in a Vertical A-Coil Air Conditioner
- How to Troubleshoot a General Electric AC Model AJJ10DFV1
- How Does the Air From an Air Conditioner Change the Temperature?
- How to Remove the Grill of an Emerson Window Air Conditioner
- How to Remove Water in an LG Air Conditioner
- How to Remove H2O From the Air
- How to Stop Water From Spitting From the AC
