How to Build Wood Doll Furniture

Tables

• 1

  Create a pattern by drawing a rectangle 3 inches by 2 inches. Draw two sets of thin rectangles, one set the length of the table and one set the width and both sets a quarter inch wide. These are the under-base of the table. Draw four rectangles 2 inches long and a quarter inch wide; these are the legs.

• 2

  Trace the patterns onto the plywood.

• 3

  Cut these shapes out with the saw. Use the Dremel tool to smooth the edges and sand for extra care.

• 4

  Glue the under-base to the bottom edges of the table and glue the legs into the inside corners of this base. Allow to set for 24 hours.

• 5

  Decorate as desired and adjust pattern size for other house tables, such as coffee table and end tables.

Chairs

• 6

  Create a pattern by drawing a square 1 inch by 1 inch with a 1/4-inch notch on each of the ends of one side. Draw four thin rectangles, each 1 inch long and a quarter inch wide. These are the under-base of the chair. Draw four rectangles 1 1/2 inches long and a quarter inch wide, these are the legs. Draw one rectangle 2 inches long and 1 inch wide with a 1/2-inch notch in the middle of one 1-inch end.

• 7

  Trace the patterns onto the plywood. Repeat for as many chairs as desired.

• 8

  Cut these shapes out with a saw. Use the Dremel tool to smooth the edges and sand for extra care.

• 9

  Glue the under-base to the chair seat, the 1-by-1 inch piece. Glue the legs to the inside edges of the under-base and glue the back rectangle on by fitting it in the notches. Allow it to set for 24 hours. Repeat for all chairs.

• 10

  Decorate as desired and adjust pattern size for other house chairs such as desk chairs and living room seats.