The Toro CCR2450 is a 20-inch, walk-behind snow thrower for consumer use. This model has been discontinued by Toro, although used snow throwers are still available. As part of regular, pre-season maintenance, Toro recommends installing a new spark plug in the engine once a year. A spark plug wrench lets you remove the old plug and replace it with a new part in less than half an hour.
- Spark plug wrench
- Plug gapping tool
Show More
Instructions
-
-
1
Remove the round clip on the engine wire from the tip of the old spark plug installed in the CCR2450. The plug faces toward the back of the engine.
-
2
Remove the old plug, twisting counterclockwise with the spark plug wrench.
-
-
3
Set the gap on the new plug to 0.030 using the gapping tool to bend the L-shaped prong on one end of the plug.
-
4
Insert the new plug into the socket and tighten with the wrench.
-
5
Clip the engine wire on the tip of the new plug.