# How to Change a Fuel Filter on a Husqvarna 350
The Husqvarna 350 blower uses a fuel filter inside the fuel tank to remove dirt and solids from the fuel while the engine is running. The fuel filter assembly consists of two filter elements and a screen held together by a filter holder and retainer clip. A clogged fuel filter on the 350 blower can cause poor engine acceleration and performance during operation. Replace the fuel filter using a only small wire hook.
Things You'll Need
- Small wire hook or dental hook
Instructions
-
-
1
Remove the fuel filler cap.
-
2
Look into the fuel filler opening and locate the fuel filter assembly. The filter is a small cylindrical part attached to the end of the fuel supply hose inside the fuel tank.
-
3
Insert the hook into the fuel filler opening and fish the fuel filter assembly out of the fuel filler opening.
-
4
Grasp the fuel supply hose firmly and unplug the fuel filter assembly from the fuel supply hose. Plug the new fuel filter assembly on the fuel supply hose.
-
5
Push the supply hose and fuel filter assembly back into the fuel tank. Replace the fuel filler cap.
-
1
Lawn Tools
- How Do I Change the Drive Star on a Husqvarna 350?
- How to Change a Husqvarna Lawnmower Drive Belt
- How to Change the Drive Starter on a Husqvarna 350
- How to Tell the Age of a Husqvarna 350
- How to Change Oil on a Rear-Propelled Lawnmower
- How to Change a Lawnmower's Fuel Filter
- How to Change an L108 John Deere Fuel Filter
- How to Change the Fuel in the X575
- How to Troubleshoot the Husqvarna 155BT Blower
- How to Replace a Sprocket on a 350 Husqvarna
- How to Change a Bionaire Humidifier Filter
- How to Change the Charcoal Filter in a Microwave
