The rated operating capacity (ROC) on the Bobcat 843H is 1,700 lb. The ROC refers to the amount of weight that the skid loader can carry without tipping over. Never exceed Bobcat's ROC recommendations. If you do, then you run the danger of tipping the machine over and injuring yourself.
The operating weight is 6,480 lb. This weight includes everything, but the actual weight of the load. The operating weight includes the weight of the machine, the operator and a full tank of gas.
The tipping load weight is 3,420 lb. The tipping load is how much weight the machine needs to cause the wheel loader to slip over the front axle. The tipping load is the load at the machine's center of gravity.
The total dimensions of the Bobcat 843H is 10 feet 1 inch long by 5 feet 2 inches wide and 6 feet 7 inches high. The bucket arm reaches up to nearly 2 feet high, and the height from the ground to the bucket hinge pin is nearly 10 feet. The wheelbase is 3 feet 2 inches wide.
This system comes with auxiliary hydraulics --- which uses hydraulic fluid to lift attachments --- and the Bob-Tach Attachment Systems, which is a Bobcat technology that helps you easily change out skid loader attachments.
The pump capacity for this loader is 16.1 gallons per minute (gpm) with an auxiliary high flow of 22.3 gpm. The engine uses diesel fuel. The Bobcat 843H has a 54 horsepower engine and a liquid engine cooling unit, which keeps the engine from overheating when you are operating it. This is not a turbocharged engine.