Mustang Skid Steer Mtl 16 Specifications

Total Size

• The dimensions of the Mustang MTL16 Multi-Terrain Loader are 11 feet 6 inches long with the bucket by 5 feet 2 inches wide by 7 feet high. It is 9 feet long without the bucket attachment. It has a ground clearance of 12 feet 2 inches and the arm can reach up to 2 feet 8 inches high. When the bucket is raised to its maximum, the clearance is 7 feet 8 inches high. The rear turning radius of the tractor is approximately 5 feet, and the turning radius with the bucket is 7 feet 8 inches.

Undercarriage

• The track only exerts 4.9 pounds per square inch (psi) on the ground. This means that you can roll this skid steer loader over turf, lawn and sod without damaging it. The track is similar to a wheel, except that it's long and thin and runs over multiple wheels or rollers. The total length of the track is 4 feet 6 inches; the track gauge is 4 feet 1 inch. The track is 1 foot 6 inches wide. There are four rollers per side in the track. The ground contact area (footprint) for this skid steer loader is 689.2 inches squared.

Engine

• The Mustang MTL16 Multi-Terrain Loader's engine is a Yanmar model 4TNV98 and the total horsepower of this engine is 65.7. It has four cylinders and puts out 2,400 rpm. The engine displacement is 201.4 cubic inches. This engine is cooled by air, and it has 180 foot-pounds of peak torque.

Load

• The tipping load of this machine is 4,629.7 lbs. The bucket attachment can hold up to 0.57 cubic yards and the breakout force is 6,728 lbs. The breakout force is the amount of pressure needed to move the bucket upwards. The total operating load is 2,314.9 lbs. This machine features a hydraulic system with a total pump flow of 18 gallons per minute.