# How to Change the Auger Belt on a Snapper Snow Thrower
Snow throwers make snow removal much easier than using a shovel. While snow throwers do not require a lot of maintenance, the auger belt is one of the parts that you should maintain diligently. The auger belt is responsible for driving the auger, so the belt is under stress when the machine is in use. If the belt is old or weak, it may develop cracks or break completely. Replacing the auger belt is necessary for proper operation of the snow thrower.
Things You'll Need
- Socket wrench
- Auger belt
Instructions
-
-
1
Remove the belt cover with a socket wrench. Slide the belt cover off and set it aside.
-
2
Remove the two belt cover stud bolts with a socket wrench to get to the auger belt guide.
-
3
Remove the belt guide with a socket wrench.
-
4
Push down on the belt tensioner pulley with your hand. Remove the old belt and set it aside.
-
5
Install the new belt and release the belt tensioner pulley to tighten the belt.
-
6
Re-install the belt guide with a socket wrench and tighten the bolt.
-
7
Re-install the two belt cover stud bolts and tighten with a socket wrench.
-
8
Re-install the belt cover and secure it with the cover bolts. Tighten the bolts with a socket wrench.
-
1
Lawn Tools
- How to Lubricate the Auger Drive Belts on a Toro Snowblower
- How to Change the Spark Plugs on a Toro 2-cycle Snow Thrower
- How to Change the Auger Belt on a Toro 826LE
- How to Adjust the Auger Belt on a 5 Horsepower MTD Snow Blower
- How to Change the Auger Belt on a HS828 Honda Snowblower
- How to Install an MTD Auger Belt for a Snow Thrower
- How to Change the Oil on a Craftsman Snow Thrower
- How to Remove the Auger Belt from a Craftsman Snow Thrower
- How to Change Belts in My Sears Snow Thrower
- How to Replace the Drive on a Craftsman Snow Thrower
- How to Adjust a Snow Thrower
- How to Change the Belt on an MTD Snowthrower
