Ryobi CS30 Weed Eater Specs

Features

• The CS30 model trimmer has a curved shaft, which increases user comfort and decreases the overall weight of the trimmer. It features a comfort grip handle located in the center of trimmer shaft. This handle helps you control the trimmer and it reduces vibrations. Add different attachments to this trimmer simply by removing the string trimmer head. The trimmer comes with two string heads, which gives you two cutting options: fixed line string or bump feed.

Specifications

• This trimmer comes with the ZipStart carburetor, which ensures that your trimmer starts after only a few pulls. It has a low-emission, two-cycle engine, and it weighs 10.7 lbs. The string diameter is 0.080 inches, and the total cutting path for the trimmer is 17 inches. The trimmer package comes with two-cycle engine lubricant and a spool retainer. This trimmer requires a mix of two-cycle engine oil and gasoline. The trimmer uses a Champion RCJ-6Y spark plug with a 0.25 electrode gap.

Maintenance

• Only use monofilament replacement string to replace broken strings on your CS30 model trimmer. You must clean or replace the spark arrestor after 25 hours of use or after every season. Clean the air filter as it becomes dirty. Replace it if it is torn or extremely worn. If your trimmer is not working properly, ensure that your fuel filter is not clogged. Also, check your fuel cap to ensure that it is not faulty. Replace your spark plug every year.

Storage

• If you do not plan on using the trimmer for longer than 30 days, then you must store it properly. Remove all the fuel from the fuel tank. Let the engine run until it stops to remove any fuel still inside. Clean the trimmer thoroughly. Store the trimmer in a dry, but well-ventilated area. Keep it away from corrosive agents, including chemicals.