How to Install a Light on a Toro 622

The 622 is a single-stage snow thrower made by Toro, used to clear snow over driveways and sidewalks in the winter months. There are times when you will have to use the snow thrower during adverse conditions at night or in dense snow. There are a number of different universal light kits that you can affix to the snow thrower to help enhance visibility while working during snowy conditions. These kits typically include the light and a mounting bracket that you can attach to the handle of the snow thrower.

Screwdriver
Universal light kit
Plastic tie

Instructions

- 1
  Slip the mounting bracket of the universal light kit onto the handle of the Toro 622. Adjust the bracket to the angle needed and then slide the fastening bolts through the bracket's mounting hole. Tighten the screw with the screwdriver.
- 2
  Run the connection wire from the lamp down the length of the snow thrower's handle and fasten it with a plastic tie.
- 3
  Fasten the end of the light's connection wire to the alternator's adapter plug.
- 4
  Attach the light's ground wire to a bolt on the frame. Remove the bolt using a wrench, slip the ground wire between the bolt and the frame, and then tighten the bolt down.

About Bellon Disc Mowers

The Differences Between Push & Self-Propelled Mowers

Lawn Tools