# Hydroseeding Vs. Planting Grass Seed
Hydroseeding is the faster of the two methods. It takes only two to three weeks to grow into a thick lawn. Hydroseed is a combination of water, seed, fertilizer, glue and green wood fiber mulch. Contractors spray the mixture over a yard and the seed begins to germinate.
Sowing regular grass seed takes longer to produce grass, but it is less expensive than hydroseeding. You can do it yourself. With two days of work, the seed will be ready to begin sprouting.
Things You'll Need
- Rototiller
- pH test kit
- Ground sulfur
- Hydrated lime
- Hydroseed
- Rake
- Soil
- Sand
- Compost
- Fertilizer
- Broadcast spreader
- Grass seed
- Mechanical or hand spreader
- Sprinkler
- Water
Instructions
-
Hydroseed
-
1
Prepare the yard for hydroseeding. Get rid of debris and weeds to create a smooth surface. Run a rototiller over the soil to a depth of 4 to 6 inches to loosen it. Hydroseeding requires a rock-free, prepared surface.
-
2
Gather soil samples and test them with a pH test kit. Obtain one from a nursery or planting center. Follow the instructions on the box. Some cooperative extensions also have soil-testing services. Call the extension in your area to find out.
-
3
Amend the soil to make it more alkaline if it's too acidic. Add 4 ounces of hydrated lime per square yard in sandy soil to boost the pH by 1 point. Use 8 ounces per square yard in loamy soil; 12 ounces per square yard in clay; and 25 ounces per square yard in peat-type soil.
-
4
Make the dirt more acidic with ground rock sulfur. Reduce the pH by 1 point by combining 1.2 ounces of sulfur per square yard for sandy soil. Use 3.6 ounces per square yard in all other soil types. Mix it into the soil with the rototiller.
-
5
Hire a hydroseeding service. The contractor will spray the seeds over the yard, along with a starter fertilizer that contains a lot of phosphorus. This food encourages the roots to grow.
-
6
Keep hydroseeded lawns moist to promote germination. Water it twice a day to maintain moisture. Do not allow new seedlings to dry out.
-
7
Mow the lawn once it is 3 inches high. This will encourage thickness and growth.
-
8
Fertilize the lawn one month after the hydroseeding. Buy a food that is high in nitrogen. Follow the directions on the label.
Plant Seed
-
9
Clear away debris such as rocks, weeds and branches. Break up dirt clumps that are thicker than 1 inch.
-
10
Loosen the dirt to add air pockets. Till it to a depth of 4 to 6 inches. Level the planting area with top soil if necessary. Rake until smooth.
-
11
Add 1 inch each of compost and sand to increase fertility and improve drainage. Follow with a starter fertilizer high in phosphorus. Till all substances into the earth.
-
12
Spread grass seed with a mechanical or hand spreader, depending on the size of the yard. Make sure there is an even amount of seed. Rake it with the back of a metal rake to bury it 1/8 inch to 1/4 inch into the ground.
-
13
Water the grass seed at least twice daily for five to 10 minutes. Do this until the grass sprouts. Water the new lawn once daily for 15 to 30 minutes.
-
1
- A Comparison of Planting Hydro Seed Vs. Grass Seed
- Overseeding a Yard
- Grass Seed to Fertilizer Planting Ratio
- How to Schedule Grass Seed Planting
- Grass Seed Planting in the Fall
- Planting Rates of Timothy Grass Seed
- Planting Grass Seeds vs. Hydro-Seeding
- Information on Planting Grass
- How do I Prepare a Yard for Grass Seed?
- Planting Grass Seed in November
- Temperature for Planting Grass Seed
- Temperature for Planting Grass Seed
