# How to Disconnect the Bucket on a Cub Cadet SC2400
The Cub Cadet Sc2400 comes with various attachments, such as the bucket or CL 100 Tractor Loader. The one-piece beam features a 5 cu. ft. loader that connects and disconnects with the QuickAttach system from Cub Cadet. This allows for quick removal of the bucket.
Instructions
-
-
1
Park the Cub Cadet Sc2400 on level ground and set the parking brake.
-
2
Dismount and move the support bars on the QuickAttach system to the down position by removing the two pins on each side.
-
3
Rotate the arms on the support bars and replace the pins.
-
4
Get back on the Cub Cadet. Push forward the lever on the right side of the tractor connected to the hydraulic line and slowly lower the bucket to the ground. Make sure the bars are level.
-
5
Pull the attachment pins from the QuickAttach bar. Back up slowly and extend the hyudraulic lift until the bucket is free.
-
1
Lawn Mowers
- How to Rebuild the Spindle on a Cub Cadet
- How Long Is the Belt for a Cub Cadet CC-754-0640?
- How to Remove the Carburetor on a Cub Cadet Snowblower
- How to Adjust the Steering on My Cub Cadet I Series
- How to Remove the PTO in a Cub Cadet Tractor
- How to Test the Cub Cadet 2135 Solenoid
- How to Remove the Steering Wheel of an International Cub Cadet 1250
- How to Replace the Cooling Fan on a Cub Cadet 1045
- How to Disconnect the Reverse Power Take-Off on a Cub Cadet 3185
- How to Take the Bucket Off a Cub Cadet 7274 Tractor
- How to Replace the Transmission Belt in a Cub Cadet
- How to Find Out the Year of a Cub Cadet
