# How to Disable the Reverse Safety Switch on a 3185 Cub Cadet
Cub Cadet is an American company that specializes in manufacturing lawn mowers and riding tractors, including the 3185 Cub Cadet. The 3185 has adjustable tilt steering and a fairly tight turning radius. When mowing around obstacles in crowded areas, this may not be enough. Operators of 3185s may want to move backward without having to disengage the blades. The backup safety switch automatically disengaging the blades when the mower is put in reverse, but this safety feature can be disabled.
Things You'll Need
- Wrench
- Screwdriver
- Plastic tie
Instructions
-
-
1
Park the 3185 on a flat surface, and make sure the brake is engaged.
-
2
Open the engine cover, and use a wrench to remove the negative battery cable.
-
3
Lower the mower's deck to its lowest setting by adjusting the deck lever.
-
4
Use a screwdriver to remove the screw holding the gear shift cover in place. Set the screw aside, and lift the piece of trim partially out of the way to access the reverse safety switch.
-
5
Unplug the reverse safety switch from the plastic wiring harness. Secure it to the frame with a plastic tie.
-
6
Put the trim cover back in place, and replace the screw. Replace the negative battery cable.
-
1
Lawn Mowers
- How to Rebuild the Spindle on a Cub Cadet
- How to Disconnect the Bucket on a Cub Cadet SC2400
- How Long Is the Belt for a Cub Cadet CC-754-0640?
- How to Remove the Carburetor on a Cub Cadet Snowblower
- How to Adjust the Steering on My Cub Cadet I Series
- How to Disable the Push Button Rio Switch on a John Deere Riding Mower
- How to Remove the PTO in a Cub Cadet Tractor
- How to Test the Cub Cadet 2135 Solenoid
- How to Remove the Steering Wheel of an International Cub Cadet 1250
- How to Replace the Cooling Fan on a Cub Cadet 1045
- How to Disconnect the Reverse Power Take-Off on a Cub Cadet 3185
- How to Disconnect the Reverse Safety Switch on a John Deere Riding Mower
