Park the MTD Yard Machine on a level surface and set the parking brake. Pull the cap off the center of the rear wheel rim with a pair of pliers.
Loosen the center bolt with a ½-inch socket wrench. It might be necessary to use a breaker bar on your socket wrench handle for extra leverage when loosening the wheel bolt. Do not remove the bolt completely.
Position a bottle jack or floor jack under the rear frame of the Yard Machine. Raise the rear of the mower until the tire is 3 inches off the ground. Place a jack stand under the frame on each side of the jack. Lower the jack just enough to place the weight of the mower on the jack stands.
Soak the axle where it meets the rim at the front of the rim and back of the rim with penetrating lubricant. Allow the lubricant to work for 15 minutes.
Strike the head of the axle bolt with a hammer three times to knock away some of the rust adhering the axle to the rim. Remove the center bolt completely with the socket wrench. Grab the tire on two sides and pull it straight off the axle.