A Patch Kit to Fix a Hole in a Lawn Mower Bag

Preparing the Bag

• Lawn mower bags tend to get dirty while mowing and in storage. It is important to clean the outside of the bag by first removing it from the mower. Spread the section with the hole on a flat work surface. Wash the bag with a soapy solution of warm water and a squirt of dishwashing detergent or car wash shampoo. Rinse the bag well and allow it to dry completely before applying the patch. This provides a clean surface that enables the patch to adhere properly to the fabric.

Using Vinyl Patches

• An inexpensive way to repair the hole in the lawn mower bag is to purchase a self-adhesive vinyl patch kit from a fabric, craft and hobby or discount store. These are relatively inexpensive and work well on holes that are smaller than a quarter. Just peel off the backing on the patch and apply it over the hole in the bag. Press the patch firmly with your fingers and smooth it out over the entire section of the hole. Another way to ensure bondage of the adhesive is to use a vinyl roller over the area. The patches are available in a variety of colors that help make it less noticeable on the bag.

Fabric Tear Repair Kit

• Using repair tear for outdoor fabrics, such as a lawn mower bag, is an effective way to seal the hole quickly. The tape adheres to uneven weaves, which are often found in lawn mower bag fabrics. It is available at sports and hunting supply, hardware and many stores that sell outdoor gear. The tape is usually clear, so it is not as noticeable as colored patches. It is strong enough to repair large holes or tears, and it is long lasting. Use a pair of sharp scissors to cut a patch that extends about 1 inch beyond all sides of the hole. Lay it over the clean, damaged area and rub it on with a circular motion from your fingertips. This helps ensure adhesion of the product.

Repairing Tiny Holes

• Consumers can repair tiny holes with a liquid vinyl treatment that is available in a variety of colors. You can find this at hardware, discount and home supply stores. Clean the outside of the lawn mower bag and apply the product with the end of a toothpick or another small, pointed object, such as a nail. Spread the liquid vinyl over the hole and wait for it to dry according to the label directions. Put the bag back on the lawn mower once the liquid vinyl hardens. This method prevents tiny holes from enlarging due to the pressure that builds up inside the bag while in use.