How to Adjust a Hunter MP Rotator Sprinkler

Radius

• 1

  Insert the flat-head screwdriver portion of the supplied Hunter adjustment tool into the radius adjustment screw on the top of the spray head. You can also use a flat-head screwdriver to adjust the radius screw.

• 2

  Twist the radius adjustment screw to the right or clockwise four complete turns to reduce the radius or stream throw. The radius can be reduced by 25 percent.

• 3

  Twist the radius adjustment screw to the left or counterclockwise four complete turns to restore the MP sprinkler's radius to its full throw.

Arc

• 4

  Align the left edge indicator, which is a vertical gray line printed on the side of the sprinkler, with the leftmost edge of the watering area upon installation. The left edge is fixed and can't be adjusted.

• 5

  Turn on the sprinkler system so that the MP extends above ground and operates.

• 6

  Fit the hollow round part of the Hunter adjustment tool over the top of the MP sprinkler head until it sits on the arc adjustment ring.

• 7

  Twist the arc adjustment ring to the right or clockwise to increase the arc or expand the rotation range.

• 8

  Twist the arc adjustment ring to the left or counterclockwise to decrease the arc or narrow the rotation range.