Toro Funny Pipe Installation

Toro Funny Pipe is a flexible pipe installed in irrigation systems. Toro Funny Pipes, fittings and sprinkler heads come in a variety of lengths and sizes. Installing Funny Pipes requires no clamps, cement or high-powered tools. The pipes work with any type of existing irrigation system. Funny Pipes are generally used to enhance a current irrigation system. The flexible pipe and easy installation adds water lines to yard or garden areas where the current irrigation system doesn’t reach.

Shovel
Funny Pipe tubing
Funny Pipe fittings
Pipe cutter
Rag

Instructions

- 1
  Turn off the main water supply for the irrigation system.
- 2
  Dig a hole around the irrigation system pipes where the Funny Pipe and fittings will be installed. Ensure the hole is large enough to connect the Funny Pipe and fittings to the appropriate irrigation head or pipe.
- 3
  Wipe away dirt from the irrigation pipe with a rag where the Funny Pipe will be installed.
- 4
  Using a pipe cutter, cut the amount of Funny Pipe needed to go from the horizontal irrigation pipe to the location where irrigation is being added.
- 5
  Screw the Funny Pipe fitting onto the fitting on the irrigation pipe.
- 6
  Attach the Funny Pipe by pushing it onto its fitting. The Funny Pipe should cover the fitting's threads.

How to Adjust the Tracking on a Scag Mower

How to Repair the Pull Cord Retraction Spring on a Toro Snowblower

Garden Tools & Supplies