Home Garden
# Home & Garden >> Garden & Lawn >> Garden Tools & Supplies

How to Convert a Spot Sprayer to an ATV Sprayer

A spot sprayer is a type of sprayer used for handgun spraying of substances on the ground, bushes and flowers. A spot sprayer is most often used to apply herbicides and insecticides. These sprayers have pressure adjustment capabilities. If you want something stronger than a spot sprayer, you can convert it to an ATV sprayer.

Instructions

    • 1

      Turn off the spot sprayer and verify there is nothing running through the nozzle. Remove the nozzle from the spot sprayer. Unplug the connection from the hose to the spot sprayer. Pull the nozzle off the spot sprayer and set it aside.

    • 2

      Flip the switch on the top of the ATV sprayer and make sure it is turned off. Disconnect the hose from the ATV sprayer. Pull it apart by hand and set the hose aside.

    • 3

      Attach the ATV hose to the spot sprayer. Slide it into place and push down firmly until it is tightened down. Turn on the spot sprayer that now has the ATV nozzle.

    • 4

      Open up the top of the ATV sprayer and fill it with insecticide or another type of pesticide. Turn on the sprayer and press the nozzle to release the chemicals. Check that it is spraying out the chemicals and covering a 140-inch diameter.

Previous:

Next:

Garden Tools & Supplies
  1. How to Convert a Chair to a Glider
  2. How to Use an ATV With a Lawn Sprayer
  3. How to Spot Hail Damage
  4. How to Convert DWG to Revit
  5. How to Convert a Colonial to a Dutch Colonial
  6. How to Convert to a Standing Desk
  7. How to Refill Roundup Pump 'N Go Sprayer
  8. How to Convert a Pool to a Fountain
  9. How to Build an ATV Sprayer Boom
  10. How to Convert an LP Gas Grill to NG
  11. How to Convert 87 cm to Inches
  12. How to Convert a Wand Sprayer to a Boom Sprayer

Home Garden © https://www.98905.com