Can I Drill Holes in Black Vinyl Landscaping Edging?

Drill Bit

• To drill through a vinyl substance, a drill bit suitable for wood is ideal. This style of drill bit has sharp teeth that allow the bit to penetrate through the thick vinyl in a smooth, steady manner. Masonry bits, by way of contrast, do not have the same style of sharp teeth as a drill bit for wood.

Drilling

• To drill through the vinyl landscape edging, place the drill bit in a cordless or electric drill. Typically, an electric drill will have more drilling power than the cordless variety, though this will likely not be an issue when drilling through vinyl. Position the drill bit in the area in which you want to make the hole and press the drill's trigger. Exert some force on the drill, but do not press so hard that the drill bit binds.

Drilling Safety

• Though drilling through the landscape edging is a somewhat safe activity, it's always important to follow basic drilling safety tips. Wear safety goggles to avoid getting shavings from the hole in your eyes, and keep your non-drilling hand away from the spinning drill bit. After finishing the hole, avoid touching the drill bit, as it can be very hot if you've used it at length.

Edging Tabs

• While drilling through the landscape edging to create holes through which water can run freely is useful, you can also drill through the edging's tabs to expand the holes. Landscape edging often has tabs that sit on the ground; these tabs contain holes through which you hammer long nails to keep the edging in position. If these holes are not big enough for your nails, use a large drill bit and bore out the holes.