How to Put Together a Rubbermaid Shed

All Rubbermaid outdoor sheds are weather-resistant, leak-resistant and dent-resistant, as well as maintenance free. Expect no rusting, rotting or other problems with a Rubbermaid shed. Every shed includes step-by-step instructions with easy-to-follow diagrams, and part names are molded into each piece for easy identification. The sheds are relatively simple to put together, and the only tool required in assembly for most models is a rubber mallet. The following instructions are specific to model number 3747, Rubbermaid Large Horizontal Storage Shed.

Rubbermaid Horizontal Storage Shed
Rubber mallet

Instructions

- 1
  Select a level area with ground drainage. A level area ensures roof and door hinges work properly.
- 2
  Check to make sure you have all necessary parts. Names are molded in the part pieces. Model number 3747 includes a roof pre-assembled with roof support, floor, half back (right), half back (left), left door and right door.
- 3
  Slide left and right back pieces together. Bend the two sides to form 90 degree angles with the back.
- 4
  Slide the floor in place between the sides. The molded word "Floor" should be facing up. Tap the floor securely in place with a rubber mallet.
- 5
  Take the left door, and align the hole in the top of the door with the pin on the side wall. Rotate the door, and snap the pin on the bottom of the door in place in its corresponding hole in the floor.
- 6
  Repeat the last step with the right door to install the right door.
- 7
  Locate the guide formed in the right panel. Slip the roof support rod into the guide.
- 8
  Locate the pivot point on the back. Slide back of the roof on the pivot point.

How to Design a Shed Roof

Do-It-Yourself Greenhouse Construction With Polycarbonate Panels

Garden Sheds