# How to Make a Garden Bench Seat
There are various styles for garden benches. If you like the rustic look, you will enjoy making this garden bench seat. This bench seat can be made in one afternoon and will look fine in any setting. Think of making more than one and create multiple seating areas in your garden or on the deck.
Things You'll Need
- 2 large tree stumps or cut firewood approximately 3 feet tall
- 6-foot long by 2- to 3-foot wide barn wood or cedar plank
- Long wood screws
- Drill
- Circular saw
- Sander with medium grit sandpaper
- Measuring tape
- Stain and polyurethane (optional)
Instructions
-
-
1
Level the ends of the tree stump or firewood logs with the circular saw. Make sure the stumps or logs are the same height. Place about 5 feet apart.
-
2
Sand the top of the barn wood or cedar plank until smooth. Sand the edges to keep from getting splinters.
-
3
Lay the barn wood or cedar plank across the top of the logs. Make sure the plank sticks out past the stumps. When it is in desired position, Drill two wood screws into the top of the plank and down into the stumps.
-
4
Stain and/or polyurethane if desired. You will need two coats of stain and three coats of polyurethane over the entire seating surface.
-
1
Previous:
Garden Furniture
- How to Make an Outdoor Moss Bench or Seat
- How to Make a Chinese Garden Seat
- How to Make a Wood Garden Bench
- How to Make an Outside Bench
- How to Make a Mosaic Garden Bench
- How to Make Garden Furniture
- How to Make a Concrete Garden Bench
- How to Make a Cement Garden Bench
- How to Make a Garden Slat Bench
- How To Make a Simple Outdoor Bench
- How to Make a Wooden Garden Flag Stand
- How to Make a Corner Bench
