Ozark Trail Gazebo Instructions

Assembly

• 1

  Remove the metal gazebo frame from the carrying bag.

• 2

  Stand the frame upright so that the four leg bases are touching the ground. Have each adult grasp a leg -- you should be on diagonal corners. Slowly walk backward with the frame to unfold it to maximum width.

• 3

  Slide the roof lock mechanisms up toward the roof until they click into place. There is one lock on each of the four legs.

• 4

  Unfold the fabric shell and lay it over the roof. Adjust the shell so that the corners are lined up with the frame.

• 5

  Move under the gazebo and tie the shell's nylon ties onto the frame. The shell should fit snugly over the frame.

• 6

  Place one foot on a leg base and grasp the leg near the center. Pull up to extend the leg -- continue pulling until it clicks and locks into place. Repeat with each leg. Legs will be slightly angled out.

• 7

  Place a stake in the hole of a leg base, and push it into the ground. Tap with a hammer if necessary. Repeat for each leg.

Disassembly

• 8

  Pull each of the four stakes out of the ground.

• 9

  Working simultaneously with a second adult, press in the button located near the center of the leg to unlock it. Lower the leg. Repeat with the other two legs.

• 10

  Untie the nylon ties, located under the shell. Lift the shell off the frame and fold it neatly.

• 11

  Press the snap buttons, located on the top of each leg. Slide the roof downward, and collapse the frame. Place all items in the supplied carry bag to store them.