Instructions for EZ Up Tents

Place the tent frame in the area you intend to set up. Make sure there is enough clearance overhead for the height of the tent.

Pull the ends of the frame apart until the tent frame is fully extended. This is best performed with a partner so that each of you can grab an end of the frame.

Place the canopy over the top of the frame and attach the Velcro strips at the corners of the canopy to the strips on the top corners of the frame.

Line up the grommets on the sides of the canopy with the bolts spaced across the top of the frame.

Unscrew the attachment nut from the frame bolt and place the corresponding canopy grommet over the bolt.

Fit the attachment nut over the bolt and screw it in. This will secure a section of the canopy to the top of the frame.

Repeat steps 5 and 6 with the remaining canopy grommets and frame bolts.

Use the slider at each corner of the frame to raise or lower the canopy, depending on the height you would like the canopy to be.

Adjust the peak poles in the center of the tent to adjust the tension of the canopy.