Lay the table to right-side down on the work surface then center the pedestal, feet up, on top of the table top. Rectangular, square or circular table tops will all work for this pedestal table.
Drill four holes, evenly spaced, through the top of the pedestal into the underside of the table top. Size the holes to fit the flat head bolts, and to be as deep as half the depth of the table top.
Screw the table top down with the flat head bolts and drill. Turn the table upright so that it is standing on the pedestal, then sand the entire table.
Paint a coat of primer over the table and let dry as per the primer manufacturer's instructions.
Lightly sand the primer, then apply a coat of paint. Let the paint dry, then lightly sand and repaint. Repeat a third time for a smooth, satin finish to your simple DIY pedestal table.