Home Garden
# Home & Garden >> Furniture >> Tables

How to Make a Kitchen Table Top Out of an Old Door

Rather than disposing of that old door, repurpose it. Transform the door into an aesthetically pleasing piece of furniture that also serves a practical purpose in your home. While the project described is for use with a plain door with a flat surface, it can be altered to use with raised panel doors. This particular kitchen table top is easy to make and budget friendly, since you use your existing kitchen table frame and legs as your base. In just a few hours you can create a vintage kitchen table top to be enjoyed for years.

Things You'll Need

  • Screwdriver
  • Hammer
  • Wood putty
  • Sand paper
  • Tape measure
  • Pencil
  • 1/2-inch plywood
  • Router
  • Construction glue
  • Wood stain
  • Rag or paint brush
  • Screw gun
Show More

Instructions

    • 1

      Remove the hardware from the door with a screwdriver. Extract any old nails or screws that were used to display wreaths and other decorative items. Apply putty to any unsightly holes. Allow the putty to dry and sand the entire door.

    • 2

      Measure the diameter of the door knob and any additional dead bolt holes in the door.

    • 3

      Mark the measurements on 1/2-inch thick plywood. Use a router to cut the circular pieces from the plywood. Lightly sand the edges.

    • 4

      Apply construction glue inside the holes left by the door knob and lock. Firmly press the wood circles into the holes, keeping them even with the rest of the door. Quickly wipe away the excess glue. Allow the glue to dry for one hour before making any additional changes to the door.

    • 5

      Place the door on a clean, flat surface. Apply stain to the door in a hue that complements the rest of your kitchen decor. Administer the stain in long, even strokes with a clean rag or paint brush. Allow the stain to dry completely -- at least three hours -- before applying the second coat. The older the door, the more likely it is that you will need to add a third application of wood stain.

    • 6

      Unscrew your kitchen table top from the existing frame. Set the hardware to the side. Stain the legs and table frame to match the door. The final color may vary slightly.

    • 7

      Measure the width and length of the table frame with a tape measure to ensure the proper placement of the door. Turn the door upside down on a clean surface and mark the measurements in pencil where you will center the frame.

    • 8

      Flip the table frame upside down on top of the door. Line the top of the frame with the pencil markings. Retrieve the hardware from the original table top and use it to secure the old door to the table legs with a screwdriver.

Previous:

Next:

Tables
  1. How to Make a Picnic Table With an Old Door as the Top
  2. How to Make a Recessed Table Top
  3. How to Make a Table Out of Walnut
  4. How to Make a Kitchen Table Out of Slab Wood
  5. How to Make a Table Out of an Old Bass Drum
  6. How to Make a Rustic Kitchen Table
  7. How to Make a Old Door Coffee Table
  8. How To Make a Counter-Height Table from an Old Door
  9. How to Paint an Old Kitchen Table
  10. How to Make a Table With Old Doors
  11. How to Make a Quilting Room Table With an Old Door
  12. How to Make a Card Table

Home Garden © https://www.98905.com