Slide the back and the seat together. Tighten the bolts or screws into the pre-drilled holes where the back and seat meet.
Lay the back and seat section on its side. Position the two wood legs along the side of the piece. Tighten the bolts or screws through the pre-drilled holes in the leg and the section. Turn the glider section over to the opposite side. Position the other two legs on the side and tighten the bolts.
Lift the section and set it upright.
Place the arms over the tops of the legs. Tighten the screws or bolts into the pre-drilled holes on the top of the arms.
Set the glider seat section over the top of the bottom frame. Tighten the screws or bolts into the pre-drilled holes on the frame and glider legs to connect them together.