Clean the drawer pulls even if they are new to remove any dirt, grime or grease. Use a mixture of liquid dish soap and warm water or a general household cleaner. Sponge them down then let them dry completely before continuing.
Apply a generous amount of adhesive to the front surface of a drawer pull. Use a heavy-duty, permanent adhesive that is designed for non-porous materials, such as epoxy.
Press a glass craft tile onto the front of the drawer pull so that it seats well into the glob of adhesive. You will be able to move it around before the glue dries so position it as desired.
Wrap a piece of blue painter’s tape around the drawer pull to hold the glass tile in place. Set the drawer pull in a cool, dry place and wait the amount of time recommended on the adhesive package for the glue to dry. Remove the painter’s tape and your glass tile drawer pull is ready to install.
Repeat Steps 2 through 4 for each drawer pull you need.