Disconnect the water bed from any power outlets.
Remove any bedding and expose the fill valve of the waterbed.
Lay clean bath towels around the fill valve to absorb any water overflow during air extraction.
Unscrew and remove the waterbed valve cap.
Screw the Blue Magic Super Pump air extractor to the waterbed valve.
Grip the handle of the pump and slide it out and away then back towards the waterbed valve. This pumping motion will begin to extract the excess air from the waterbed. Stop pumping when the pump begins to extract water.
Unscrew the pump from the waterbed valve.
Ensure that the water level is approximately even with the surface of the waterbed valve and screw the waterbed valve cap back in place.
Remove the bath towels, replace the bedding and reconnect the waterbed to a power outlet.